Building of LPG tank steels
LPG Automotive gas equipment
Automotive KIT / TANKS - Home
building of tanks steels of high quality, soldering steel of non sparkling
type, are used.
are specified in the EN 10120 (or equivalent) and their thickness is
in conformity with design and dimensional characteristics.
adopted for the construction of the parts subjected to pressure are
tested at the time of acceptance and certified by the suppliers.
complete welding and the heat treatement required, each tank is subjected
to an hydraulic testing according to the minimum pressure of 3.000 KPa
test the tank must show no signs of permanent deformation.
with the prescriptions of Regulation 67/01 shall be carried out for
each lot the following tests: